Skip to content

Competencies covered

MSFFL2004: Moisture test timber and concrete floors

MSFFL3003: Inspect sub-floors

Just for fun

Audio for slide 1 (mp3 |6|KB)

In this section we talked about the minimum clearance requirements between the ground and the underside of a subfloor, as set out in AS 3660. In the case of a timber-framed subfloor, the ground clearance is measured from the underside of the bearer.

Can you remember what the specifications are?

See if you can fill in the spaces below with the correct terms and measurements. Click on the answer first and then click in the space it belongs to.

hearing icon