Tools and equipment
Audio for slide 1 (mp3 |6|KB)
The basic kit of tools needed to set out, cut and install adhesive-fixed carpet and cushion underlay are much the same as for conventional installations using gripper strips.
The main additional hand tool you'll need is a notched trowel to spread the adhesive.
The main additional hand tool you'll need is a notched trowel to spread the adhesive.
Audio for slide 2 (mp3 |6|KB)
Below is a summary of the basic tool kit needed for most adhesive-fixed carpet installations.
Note that not all installers use all of these tools, and some installers may use other items that are not shown here.
Note that not all installers use all of these tools, and some installers may use other items that are not shown here.
 utility knife |  straight edge |  square |
 hammer |  tape measure |  hacksaw |
 stair tool |  knee kicker |  awl |
 loop pile cutter |  flat seam roller |  porcupine roller |
 carpet shears |  duckbill napping shears |  hot melt iron |
 chalk line |  notched trowel |  induction seaming tool |
Learning activity
Audio 3 (mp3 |6|KB)Are there any tools above that you don't use in your own on-site installations? Which ones are they?
Are there any additional tools that you do use, that aren't shown here? What are they, and what do you use them for?
Go to Health and safety
Industry Network Training and Assessment Resourses
© 2023 Workspace Training